Vehicles
Three platforms, one in each domain. Two are Blue Robotics hulls and the aircraft is built in the lab. The choice keeps most of the work in autonomy and not in fabrication.
Side by side
| BlueBoat (USV) | BlueROV2 (UUV) | Quadrotor (UAV) | |
|---|---|---|---|
| Autopilot | ArduPilot Rover | ArduPilot Sub | ArduPilot Copter |
| Companion | Onboard computer on the boat | Raspberry Pi running BlueOS | Laptop ground station on telemetry |
| Size | 1.2 m catamaran | 0.46 m frame | 98 x 89 x 29 cm, 129 cm diagonal |
| Mass | Within the 60 kg limit | Within the 60 kg limit | 6.8 kg in delivery configuration |
| Endurance | Battery, sized for a full run | Tethered to the surface | 18 min planned, land by 15 |
| Link | WiFi HaLow to shore | Tether to the boat or topside | 2.4 GHz control and telemetry |
| Tasks | 1, 3, 4 | 2, 4 | 1, 2, 3, 4 |
| Handbook limit | 2 x 1 x 1 m, 60 kg | 2 x 1 x 1 m, 60 kg | 7 kg all-up |
Why these three
Commercial surface and underwater hulls
The BlueBoat and BlueROV2 are proven platforms with ArduPilot firmware, spares and a service history. Building our own hulls would have taken most of the season on watertight enclosures. The 2026 rules reward autonomy across the three domains, so that is where the time goes.
A custom aircraft
No off the shelf aircraft carries a delivery mechanism, floats after a ditching and stays under 7 kg. The 22 inch airframe is built in the lab so the payload mount, the flotation and the battery layout can be changed as needed.
One interface for all three
Every vehicle talks MAVLink to the same adapter. Swapping a simulated vehicle for a firmware build or a real hull is a line in a configuration file. The same mission code has been running since before the hardware arrived.